DESCRIPTION:
This is the DLM™ 1/1400 scale GALAXY Class Photo-Etch Accessories specifically designed for the AMT 1/1400 scale U.S.S. Enterprise NCC-1701-D model kit.  Photo-Etch Brass parts are designed to fit over the kit's existing Phaser Strips and Transporter Emitter Pads decals. GALAXY Class Photo-Etch Accessories includes 48 brass pieces and enough to complete one 1/1400 scale Galaxy Class model kit.

CONTAINS:
(1) Photo-Etch Brass Sheet and (1) Instructions/Placement Guide.

NOTE:
Requires brush on foil adhesive and thin CA glues with a fine tip applicator (not included).

$45.00 USD

> More STAR TREK™ Accessories
> More 1/1400 Scale Accessories
> More Accessories

Description:
These three (3) clear parts replace the inaccurate 2nd Pilot Episode "A" and "B" decks of the AMT 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features transparent recessed windows, ports, and bridge dome specifically designed for lighting.

Contains:
Clear Bridge Dome (1), Clear "A" Bridge Deck (1), and Clear "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$17.50 USD

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

Description:
These three (3) resin parts replace the inaccurate 2nd Pilot Episode "A" and "B" decks of the AMT 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features recessed windows and ports and comes with transparent bridge dome. 

Contains:
Clear Bridge Dome (1), Resin "A" Bridge Deck (1), and Resin "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$12.50 USD

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

Description:
These three (3) clear parts replace the inaccurate 1st Pilot Episode "A" and "B" decks of the AMT 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features transparent recessed windows, ports, and bridge dome specifically designed for lighting.

Contains:
Clear Bridge Dome (1), Clear "A" Bridge Deck (1), and Clear "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$17.50 USD

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

Description:
These three (3) resin parts replace the inaccurate 1st Pilot Episode "A" and "B" decks of the AMT 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features recessed windows and ports and comes with transparent bridge dome. 

Contains:
Clear Bridge Dome (1), Resin "A" Bridge Deck (1), and Resin "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$12.50 USD < OUT OF STOCK

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

Description:
These three (3) clear parts replace the inaccurate Production Series "A" and "B" decks of the AMT 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features transparent recessed windows, ports, and bridge dome specifically designed for lighting.

Contains:
Clear Bridge Dome (1), Clear "A" Bridge Deck (1), and Clear "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$17.50 USD

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

Description:
These three (3) resin parts replace the inaccurate Production Series "A" and "B" decks of the AMT 1/650 Scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit. Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features recessed windows and ports and comes with transparent bridge dome. 

Contains:
Clear Bridge Dome (1), Resin "A" Bridge Deck (1), and Resin "B" Deck (1).

NOTE:
AMT 18" U.S.S. Enterprise NCC-1701 Model Kit NOT INCLUDED.

$12.50 USD

> More STAR TREK™ Accessories
> More 1/650 Scale Accessories
> More Accessories

DESCRIPTION:
This is the DLM 1/537 Scale MIRANDA Class "Transparent" Bridge for Lighting and is specifically designed to replace the inaccurate bridge on the AMT/ERTL 1/537 Scale U.S.S. Reliant #8766 model kit or similar.  Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features transparent recessed windows, ports, and bridge dome specifically designed for lighting.

CONTAINS:
(1) Clear "A" Bridge/Docking Deck, and (1) Clear "B" Observation Deck.

NOTE:
AMT/ERTL 1/537 Scale U.S.S. Reliant model kit is NOT INCLUDED.

$15.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

DESCRIPTION:
This is the DLM 1/537 Scale MIRANDA Class "Transparent" Bridge and is specifically to designed replace the inaccurate bridge on the AMT/ERTL 1/537 Scale U.S.S. Reliant #8766 model kit or similar.  Mastered by Andy Henshaw and accurately detailed for the correct size and shape. Features recessed windows, ports, and bridge dome specifically designed for non-lighting.

CONTAINS:
(1) "A" Bridge/Docking Deck, and (1) "B" Observation Deck.

NOTE:
AMT/ERTL 1/537 Scale U.S.S. Reliant model kit is NOT INCLUDED.

$10.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/72 Scale Deep Space Nine Runabout Rio Grande model kit. For lighting purposes this kit adds clear amber colored Impulse Intake Ducts to the front of the pylon supports. Replaces kit opaque plastic parts. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free. 

Contains:
Clear Amber Impulse Intake Grills (2) and Resin Impulse Intake Frames (2).

NOTE:
AMT/ERTL DS9 Runabout Rio Grande Model Kit NOT INCLUDED.

$10.00 USD

> More STAR TREK™ Accessories
> More 1/72 Scale Accessories
> More Accessories

Description:
Now you can power up the Warp and Impulse Engines with clear lighting parts for the 1/323 Scale model of Chekotay’s Maquis Rebel Peregrine Class ship. It fits to the Monogram model. The opaque gray resin parts has openings to fit in clear red panels. Clear blue grills fit into the wing hinge and along the sides. Some cutting of the kit is required to let the light shine out of the kit plastic. Use the light source of your choice with either EL materials like LightSheet, CCFL neon, and or LED's and lamps that will power up your Maquis rebel fighter. Parts assemble to the kit with CA adhesives or epoxy.

Contains:
Clear Red Engine Panels (8), Clear Blue Engine Grills (6) and Resin Engine Frames (6).

NOTE:
Electronics are NOT INCLUDED.
Revell/Monogram ST: Voyager Maquis Ship Model Kit NOT INCLUDED.

$25.00 USD

> More STAR TREK™ Accessories
> More 1/323 Scale Accessories
> More Accessories

DESCRIPTION:
This is the DLM™ 1/1000 scale "Refit" EXCELSIOR Class Detail Lighting Parts specifically designed to add accurate detail and lighting to the AMT 1/1000 scale STAR TREK U.S.S. Enterprise NCC-1701-B model kit. Kit contains 3 resin and 13 blue tinted air bubble freet parts. 

CONTAINS:
(2) Clear Blue Impulse Engine Crystals, (6) Clear Planetary Sensor Array Spotlights,  (1) Resin Forward Torpedo, (1) Resin Aft Torpedo, (2) Clear Blue Warp Engine Bussard Collectors, (1) Clear Bridge Piece, (1) Clear Control Island, and (1) Clear Blue Deflector.

NOTE:
AMT™ STAR TREK™ U.S.S. Enterprise NCC-1701-B Model Kit NOT INCLUDED.

$20.00 USD

> More STAR TREK™ Accessories
> More 1/1000 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/1000 Scale U.S.S. Excelsior. These parts are for model builders who will not be lighting up their Excelsior Class Starship. Made of solid gray polyurethane resin.

Contains:
Resin Forward Photon Torpedo Launchers (2), Resin Aft Photon Torpedo Launchers (1), and Resin Warp Engine Dekoids (2).

NOTE:
AMT/ERTL U.S.S. Excelsior Model Kit NOT INCLUDED.

$7.00 USD

> More STAR TREK™ Accessories
> More 1/1000 Scale Accessories
> More Accessories

Description:
These are the clear resin replacement parts for the AMT/ERTL 1/1000 Scale U.S.S. Excelsior. These are replacement parts (11 clear, 5 opaque) that allows the model builder to build their Excelsior Class starship with lighting. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free.

Contains:
Clear Blue Impulse Engine Crystals (2), Clear Planetary Sensor Array Spotlights (6), Resin Forward Torpedo (1), Resin Aft Torpedo (1), Resin Warp Engine Dekoids (2), Clear Bridge Piece (1), Clear Control Island (1), and Clear Blue Deflector (1).

NOTE:
AMT/ERTL U.S.S. Excelsior Model Kit NOT INCLUDED.

$20.00 USD

> More STAR TREK™ Accessories
> More 1/1000 Scale Accessories
> More Accessories

Description:
Hangar Bay conversion kit for the POLAR LIGHTS™ Kit #4204 and 808 for the motion pictures Star Ship Enterprise featured in The Final Frontier and The Undiscovered Country . This finely crafted kit by master builder Arthur Pendragon converts to the space vessel re-commissioned to U.S.S. Enterprise NCC-1701-A.

The kit comes made of 13 parts cast in gray and water clear polyurethane resins. Clear resin ceiling panels allows for lighting the interior. A further step in lighting capabilities is a version of the walls cast in clear resins to show lighting of control rooms and wall mounted lamps. Side alcoves of the bay are visible through the main walls plus an option of an open door panel leading to the cargo bays. A decal sheet and instructions are included.

Contains:
(7) Clear Resin Parts, (6) Gray Resin Parts, (1) Authentic Decals.

NOTE:
POLAR LIGHTS™ 1/350 scale U.S.S. Enterprise NCC-1701 Kit NOT INCLUDED.

$50.00 USD

> More STAR TREK™ Accessories
> More 1/350 Scale Accessories
> More Accessories

Description:
These are accessories for the POLAR LIGHTS™ 1/350 STAR TREK™ U.S.S. Enterprise NCC-1701-A and mastered by Arthur Pendragon. Now you can additional Travel Pods, Work Bees, and Cargo Containers to the Hanger/Shuttle Bay in the same scale as the 1/350 PL NCC-1701 or NC-1701-A kit.

Contains:
(8) Cargo Containers, (6) Work Bees, (4) Travel Pods, and (1) Decal Sheet.

NOTE:
POLAR LIGHTS™ 1/350 scale U.S.S. Enterprise NCC-1701 Kit NOT INCLUDED.

$20.00 USD < OUT OF STOCK

> More STAR TREK™ Accessories
> More 1/350 Scale Accessories
> More Accessories

Description:
This is the 1/537 scale Enterprise "A" Warp Engine Lighting Parts specifically designed for the AMT/ERTL 1/537 scale U.S.S. Enterprise NCC-1701/A model kits (AMT 6693, 6867, 8617) or similar. These parts are cast in a clear color dyed epoxy resin which allows light to pass through giving your model the effect of active warp nacelles and features the highest quality resin pieces and attention to detail.

Contains:
(2) Nacelle Warp Engine Grills, and (1) Illustrated Instructions.

NOTE:
AMT/ERTL 1/537 U.S.S. Enterprise NCC-1701-A Model NOT INCLUDED.

$10.00 USD < OUT OF STOCK

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

Description:
This is the 1/537 scale Enterprise "Refit" Upper Decks specifically designed for the AMT/ERTL 1/537 scale U.S.S. Enterprise NCC-1701/A model kits (AMT 6693, 6867, 8617) or similar. This part will correct the inaccurate profile and detail to your AMT/ERTL kit. This resin part is also hollow for reduce weight and features the highest quality resin pieces and attention to detail.

Contains:
(1) Enterprise NCC-1701/A Upper Decks Section

NOTE:
AMT/ERTL 1/537 U.S.S. Enterprise NCC-1701-A Model NOT INCLUDED.

$10.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

Description:
This is the 1/537 scale Enterprise "A" Officer's Mess specifically designed for the AMT/ERTL 1/537 scale U.S.S. Enterprise NCC-1701/A model kits (AMT 6693, 6867, 8617) or similar. This part will add interior detail to your AMT/ERTL kit and features the highest quality resin pieces and attention to detail.

Contains:
(1) Enterprise NCC-1701-A Officer's Mess

NOTE:
AMT/ERTL 1/537 U.S.S. Enterprise NCC-1701-A Model NOT INCLUDED.

$4.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

Description:
This is the 1/537 scale "TMP" Enterprise VIP Lounge specifically designed for the AMT/ERTL 1/537 scale U.S.S. Enterprise NCC-1701/A model kits (AMT 6693, 6867, 8617) or similar. This part will add interior detail to your AMT/ERTL kit and features the highest quality resin pieces and attention to detail.

Contains:
(1) TMP VIP Lounge

NOTE:
AMT/ERTL 1/537 U.S.S. Enterprise NCC-1701-A Model NOT INCLUDED.

$4.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

DESCRIPTION:
These are accurate 1/537 scale Enterprise "A" Detail & Lighting Parts specifically designed for the AMT/ERTL 1/537 scale U.S.S. Enterprise NCC-1701/A model kits (AMT 6693, 6867, 8617) or similar. These parts will correct many of the inaccurate details from the AMT/ERTL kit and features the highest quality resin pieces and attention to detail.

CONTAINS:
(1) Planetary Sensor Array, (1) Clear Blue Deflector Dish, (1) Deflector Dish Housing, (1) Bridge, (1) Dorsal Extension, (2) Clear Bussard Collectors, (2) Clear Blue Shuttle Door Exterior Details, (1) Clear Homing Beacon Array, (1) Clear Blue Warp Core Dome, (2) Clear Blue Warp Core Details, (1) Clear Red Photon Torpedo Detail, (20) Phaser Banks, (1) Illustrated Instructions, and (1) Aztec Pattern Guide.

NOTE:
AMT/ERTL 1/537 U.S.S. Enterprise NCC-1701-A Model NOT INCLUDED.

$40.00 USD

> More STAR TREK™ Accessories
> More 1/537 Scale Accessories
> More Accessories

Description:
The clear resin copy replacement part for the Monogram kit of the 1/677 Scale Intrepid Class, U.S.S. Voyager. The opaque resin plastic Main Deflector Dish supports the clear dish. These are a replacement parts that allows the model builder to build their ship with lighting in mind.

These are virtually the same kit parts used in the later issued Special Edition “Pro Modeler” Voyager but it is cast in a clear blue polyurethane resins and gray opaque resins.

Also included in this upgrade kit is the smaller Clear Auxiliary Deflector located to the top front of the of the main hull cast in clear blue resin. 

Contains:
Clear Blue Main Deflector Dish (1), Resin Deflector Dish Frame (1), Resin Main Deflector (1), and Clear Blue Auxiliary Deflector (1).

NOTE:
The kit replaces kit parts:
#4(Main Deflector) Opened up resin part with clear resin inserts.
#10, #9 (Warp Engines) Opened up resin parts with clear resin inserts.
#17 (Bussard Scopes). Solid clear resin insert that fits into kit parts.
#7 and #8 which must be cut open to fit. Then mask and opaque the non lit exterior surfaces.

Revell/Monogram STAR TREK™ U.S.S. Voyager Model Kit NOT INCLUDED.

$12.50 USD

> More STAR TREK™ Accessories
> More 1/677 Scale Accessories
> More Accessories

Description:
This is the clear resin replacement parts for the AMT/ERTL 1/420 Scale U.S.S Defiant's opaque rear plastic Warp Engines and Main Deflector. These are replacement parts (5 clear, 3 opaque) that allows the model builder to build their DS9 U.S.S. Defiant starship with lighting. They are cast in a clear color dyed and opaque polyurethane resins and air bubble free. 

Contains:
Clear Blue Engine Grills (2), Resin Frames (2), Clear Red Bussard Collectors (2), and Clear Blue Deflector (1).

NOTE:
The kit replaces kit parts:
#4(Main Deflector) Opened up resin part with clear resin inserts.
#10, #9 (Warp Engines) Opened up resin parts with clear resin inserts.
#17 (Bussard Scopes). Solid clear resin insert that fits into kit parts.
#7 and #8 which must be cut open to fit. Then mask and opaque the non lit exterior surfaces.

AMT/ERTL STAR TREK™ DS9 U.S.S. Defiant Model Kit NOT INCLUDED.

$20.00 USD

> More STAR TREK™ Accessories
> More 1/420 Scale Accessories
> More Accessories