Description:
This is a Saucer Mounted Torpedo Bay Conversion
Kit specifically designed for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. The part is
designed to mount on the topside in front of the saucer
section. This is
excellent for adding something different or for kit
bashers.
Contains: (1) Photon Torpedo Bay section and (1)
Torpedo Launcher.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
This is a Saucer Mounted Deflector Array Conversion
Kit specifically designed for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. Reverse side of
packaging illustrates section of saucer that needs to be
removed. This piece works well for kit
bashing projects.
Contains: (1) Deflector Dish
and (1)
Deflector Array Housing.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
This is a Saucer Mounted Shuttle Bay Conversion
Kit specifically designed for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. The piece
for the shuttle bay may be placed almost anywhere on the
3rd thru 5th grid sections (from the outer edge).
Three sections will need to be cut out. This is
excellent for adding something different or for kit
bashers.
Contains: (1) Shuttle Bay section, (1)
Shuttle Bay Doors, and (1) Landing Pad Markings decal.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
This is a Saucer Mounted Torpedo Bay Conversion
Kit specifically designed for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. The part is
designed to mount on the underside in front of the lower
sensor. The phaser banks will need to be
removed. This is
excellent for adding something different or for kit
bashers.
Contains: (1) Photon Torpedo Bay section and (1)
Torpedo Launcher.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
These are 1/537 scale MEGA Phasers specifically designed for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. These can be
mounted just about anywhere and is ideal for kit bashing
projects.
Contains: (2) Mega Phasers.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
These are transparent
replacement parts for the AMT/ERTL 1/537 scale STAR TREK
U.S.S. Enterprise NCC-1701-A Model Kit. They can be used to
replace the kit supplied plastic Deflector Dish, Impulse
Engine, and Warp Crystal Dome. Also used for static or lighting your
model kit.
Contains: (1) Transparent Red
Impulse Engine,
(1) Transparent
Blue
Deflector Dish, and (1) Transparent
Blue
Warp Crystal Dome.
NOTE:
AMT STAR TREK 1/537 NCC-1701-A Model Kit
NOT INCLUDED.
Description:
This is a
replacement part for the AMT/ERTL STAR TREK 3 - Piece
Enterprise (TV) Set Model Kit. It is specifically
designed to convert the U.S.S. Enterprise NCC-1701-D kit
into the "AFT" section where the Command Bridge is
located during a "Saucer Separation".
Contains:
(1) Battlehead Section and (1) Decal Sheet.
NOTE: AMT U.S.S. Enterprise (TV) 3 - Piece Set Model Kit
NOT INCLUDED.
Description:
These are transparent
replacement parts for the AMT/ERTL 1/72 scale STAR TREK
Deep Space Nine - Runabout Rio Grande Model Kit. They can be used to
replace the kit supplied plastic Intake Grills. Also used for static or lighting your
model kit.
Contains: (2) Transparent
Red
Intake Grills and
(2) Transparent
Red
Exhaust Ports.
NOTE: AMT STAR TREK: DS9 Runabout Rio Grande Model Kit
NOT INCLUDED.
Description:
These are transparent
replacement parts for the AMT/ERTL STAR TREK 3 - Piece
Enterprise (TV) Set Model Kit. They can be used to
replace the kit supplied plastic BU.S.S.ard Collectors and
Nacelles. Also used for static or lighting your
model kit.
Contains:
(2) Transparent
Red
BU.S.S.ard Collectors,
(2) Transparent
Blue
Nacelles, and (1) Transparent
Blue
Deflector Dish.
NOTE: AMT U.S.S. Enterprise (TV) 3 - Piece Set Model Kit
NOT INCLUDED.
Description:
These are transparent
replacement parts for the AMT/ERTL STAR TREK 3 - Piece
Enterprise (Movie) Set Model Kit. They can be used to
replace the kit supplied plastic BU.S.S.ard Collectors and
Nacelles. Also used for static or lighting your
model kit.
Contains:
(2) Transparent
Red
BU.S.S.ard Collectors
and (4) Transparent
Blue
Nacelles.
NOTE:
AMT U.S.S. Enterprise (Movie) 3 - Piece Set Model Kit
NOT INCLUDED.
Want to be notified when new products
arrive? Join our Starfleet Models Mailing List and
find out instantly when new items have been added to our
inventory!
)
){kind=small}
)
){kind=small}
)
){kind=small}
)
){kind=small}
)
){kind=small}
)
)
)
){kind=small}
){kind=small}
){kind=small}
)
){kind=small}
)
){kind=small}
)
){kind=small}
