DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "Refit" NOVA Class - U.S.S. Rhode Island NCC-72701 resin model kit as seen on the STAR TREK VOYAGER "END GAME" episode. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 3 resin pieces including display base and measures approximately 6.5" long x 3.25" wide when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale U.S.S. Kelvin model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 8 resin pieces including display base and measures approximately 10" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (1) Deflector Array, (1) Deflector Emitter, (1) Shuttle Bay, (1) BU.S.S.ard Collector, (1) Nacelle, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "TUG" PTOLEMY Class Transport - U.S.S. Ptolemy NCC-3801 resin model kit as designed by Franz Joseph. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 11 resin pieces including display base and measures 7.75" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Cargo Docking Port, (2) Nacelles, (1) Deflector Array, (1) Deflector Support, (1) Deflector Emitter, (1) Cargo Container, (2) Cargo End Caps, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "Dreadnought" FEDERATION Class - U.S.S. Federation NCC-2100 resin model kit as designed by Franz Joseph. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 10 resin pieces including display base and measures approximately 8.5" long x 4" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (3) Nacelles, (2) Deflector Arrays, (2) Deflector Emitters, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale SALADIN Class Scout/Destroyer - U.S.S. Saladin NCC-500 resin model kit as designed by Franz Joseph. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 6 resin pieces including display base and measures approximately 6.5" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Nacelle, (1) Deflector Array, (1) Deflector Support, (1) Deflector Emitter, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$35.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale NEW ORLEANS Class - U.S.S. Kyushu NCC-65491 resin model kit as seen on the STAR TREK THE NEXT GENERATION "BEST OF BOTH WORLDS" Part II episode. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 9 resin pieces including display base and measures approximately 10.5" long when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (1) Nacelle Pylon, (3) Pods, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$70.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/200 Scale COLONIAL Heavy 798 resin model kit as seen on the new BATTLESTAR GALACTICA television series. This kit features the highest quality resin pieces and incredible attention to detail. Can be built with landing gear up or down. Kit contains 28 resin pieces including the main body which is "roto-cast" to reduce weight and display base. Measures approximately 16.5" long when fully assembled.

CONTAINS:
(27) Enough resin parts to complete one model, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$170.00 USD < OUT OF STOCK

> More Battlestar Galactica Models
> More 1/200 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale DOMINION Jem'Hadar Attack Cruiser resin model kit as seen on the STAR TREK DEEP SPACE NINE television series. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains 17 resin pieces including the main body which is "roto-cast" to reduce weight and display base.  Measures approximately 18" long x 19" wide when fully assembled.

CONTAINS:
(16) Enough resin parts to complete one model, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$200.00 USD < OUT OF STOCK

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale OBERTH Class and Corvette resin model kit as seen on STAR TREK THE SEARCH FOR SPOCK movie. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains 7 resin pieces (enough for 2 models) including display bases and measures approximately 3.5" long when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1000 Scale "Classic" ROMULAN Bird of Prey resin model kit as seen on the original STAR TREK "BALANCE OF TERROR" episode. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains 7 resin pieces including display base and measures approximately 5" long when fully assembled. 

CONTAINS:
(1) Primary Hull, (2) Nacelle Support Wings, (2) BU.S.S.ard Collectors, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale N.S.E.A. Protector resin model kit as seen on the GALAXY QUEST movie. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains 9 resin pieces including "detachable shuttle" and display base. Measures approximately 12.5" long when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Detachable Bridge/Shuttle, (2) Hydrogen Collectors, (2) Engine Supports, (2) Drive Engines, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$75.00 USD

> More GALAXY QUEST Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "Early" ROMULAN Bird of Prey resin model kit as seen on the STAR TREK ENTERPRISE television series. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains includes 6 resin pieces including display base and measures approximately 6" long when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Nacelle Support Wings, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale CENTAUR Class - U.S.S. Centaur NCC-42043 resin model kit as seen on the STAR TREK DEEP SPACE NINE television series. This kit features the highest quality resin and incredible attention to detail. Kit contains 6 resin pieces including an "optional alternative bridge" and display base.  Measures approximately 11" long when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Nacelles, (1) Torpedo Bay/Nacelle Pylons, (1) Optional Alternate Bridge, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$70.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale SABER Class - U.S.S. Yeager NCC-61947 resin model kit as seen on the STAR TREK FIRST CONTACT movie. This kit features the highest quality of resin pieces and incredible attention to detail.  Kit contains 6 resin pieces including display base and measures approximately 6" long when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (2) BU.S.S.ard Collectors, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "AGT" Future Enterprise Conversion Kit - U.S.S. Enterprise NCC-1701-D as seen on the STAR TREK THE NEXT GENERATION "ALL GOOD THINGS" television episode. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 13 resin pieces and is specifically designed to convert an AMT/ERTL 1/1400 Scale STAR TREK U.S.S. Enterprise NCC-1701-D model kit into the "AGT" Future Enterprise.

CONTAINS:
(13) Future Enterprise Conversion Parts (1) Decal Sheet, and (1) Instruction Sheet.

NOTE:
AMT/ERTL STAR TREK U.S.S. Enterprise NCC-1701-D model kit is NOT INCLUDED. Requires paint and modeling cement (not included).

$65.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale MIRANDA Class - U.S.S. Reliant NCC-1864 resin model kit as seen on the STAR TREK THE WRATH OF KHAN movie.  This kit features the highest quality of resin pieces and incredible attention to detail. This kit contains 5 resin pieces including display base and measures approximately 7" long when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (1) Weapons Pod/Support Pylon, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD < OUT OF STOCK

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale STEAMRUNNER Class - U.S.S. Appalachia NCC-52136 resin model kit as seen on the STAR TREK FIRST CONTACT movie. This kit features the highest quality of resin pieces and incredible attention to detail.  Kit contains 7 resin pieces  including display base and measures approximately 10.5" long when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$75.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale NOVA Class - U.S.S. Equinox NCC-72381 resin model kit as seen on the STAR TREK VOYAGER "EQUINOX" Parts I & II episodes.  This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 2 resin pieces including display base and measures approximately 6" long.

CONTAINS:
(1) NOVA Class Starship, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale PROMETHEUS Class - U.S.S. Prometheus NX-59650 resin model kit as seen on the STAR TREK VOYAGER "MESSAGE IN A BOTTLE" television episode. This kit is cast in 1 of 3 main pieces which are specifically designed to separate and "snap" back together. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 7 resin pieces including display base and measures approximately 11" long when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Secondary Hulls/Nacelles,  (1) Nacelle Housing, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$70.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale AKIRA Class - U.S.S. Thunderchild NCC-63549 resin model kit as seen on the STAR TREK FIRST CONTACT movie. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 7 resin pieces including display base and measures approximately 11" long when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Secondary Hulls/Pylons, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$80.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale DOMINION JEM'HADAR Fighters as seen on the STAR TREK DEEP SPACE NINE television series. This kit features the highest quality of resin pieces and incredible attention to detail.  Kit contains 7 resin pieces including display base and measures approximately 3" long each when fully assembled.

CONTAINS:
(3) Primary Hulls, (3) Secondary Hulls, (1) Instruction Sheet, and (1) Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale CHEYENNE Class - U.S.S. Ahwahnee NCC-71620 resin model kit as seen on the STAR TREK THE NEXT GENERATION "BEST OF BOTH WORLDS" Part II episode. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 8 resin pieces including display base and measures approximately 10.5" long when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Nacelle Pylons, (4) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale OLYMPIC Class - U.S.S. Pasteur NCC-58925 resin model kit as seen on the STAR TREK THE NEXT GENERATION "ALL GOOD THINGS" episode.  This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 4 resin pieces including display base and measures approximately 9" long when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$50.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "Refit" EXCELSIOR Class - U.S.S. Enterprise NCC-1701-B resin model kit as seen on the STAR TREK GENERATIONS movie. This kit features the highest quality of resin pieces and incredible attention to detail.  Kit contains 6 resin pieces including display base and measures approximately 11" in length when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (2) Nacelles, (1) Cargo Bay, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale EXCELSIOR Class - U.S.S. Excelsior NCC-2000 resin model kit as seen on the STAR TREK SEARCH FOR SPOCK and UNDISCOVERED COUNTRY movies. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 6 resin pieces including model base and measures approximately 11" in length when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (2) Nacelles, (1) Cargo Bay, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD < OUT OF STOCK

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale "Refit" CONSTITUTION Class - U.S.S. Enterprise NCC-1701-A resin model kit as seen on the STAR TREK 1 - 6 movies.  This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 5 resin pieces and is approximately 9" long when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS 1/1400 Scale CONSTITUTION Class - U.S.S. Enterprise NCC-1701 resin model kit as seen on the original STAR TREK television series.  This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 5 resin pieces and is approximately 9" long when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STAR TREK Models
> More 1/1400 Scale Models
> More Models