DESCRIPTION:
This is the AMT®/ROUND 2™ 1/1000 scale STAR TREK™ U.S.S. Enterprise NCC-1701-B model kit as seen in the STAR TREK™ GENERATIONS movie.  This kit features upgrades from the previous versions, including "Aztec" paneling decals and dome style base. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand, and illustrated instructions.

NOTE:
Glue and Paint (NOT INCLUDED).

COMING IN DECEMBER

> More AMT®/ROUND 2™ Models
> More STAR TREK™ Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/537 scale STAR TREK™ U.S.S. Reliant NCC-1864 model kit as seen in STAR TREK™ THE WRATH OF KHAN movie.  This kit features upgrades from the previous versions, including "Aztec" paneling decals and dome style base. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand, and illustrated instructions.

NOTE:
Glue and Paint (NOT INCLUDED).

COMING IN SEPTEMBER

> More AMT®/ROUND 2™ Models
> More 1/537 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/350 scale STAR TREK™ KLINGON Bird of Prey model kit as seen in the STAR TREK™ movies.  This kit features upgrades from the previous versions, including adjustable wind baffles to pose the wings, a landing gear, dome style base, and marking decals. Skill Level 2 for ages 10 and up.

CONTAINS:
Decals, Instructions, and Display Base/Stand.

NOTE:
Glue and Paint (NOT INCLUDED).

COMING IN OCTOBER

> More AMT®/ROUND 2™ Models
> More 1/350 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/2500 scale STAR TREK™ Cadet Series U.S.S. Enterprise NCC-1701-E model kit as seen in the STAR TREK™ movies.  This kit features upgrades from the previous versions, including "Aztec" paneling decals and snap together assembly with option to gluing. Kit measures 10.5" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand,  and illustrated instructions.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$13.95 USD
Reg. $17.39
You Save $3.44

> More AMT®/ROUND 2™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/2500 scale STAR TREK™ Cadet Series U.S.S. Enterprise NCC-1701-D model kit as seen in the STAR TREK™ THE NEXT GENERATION™ television series.  This kit features upgrades from the previous versions, including "Aztec" paneling decals and snap together assembly with option to gluing. Kit measures 10" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand,  and illustrated instructions.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$13.95 USD
Reg. $17.39
You Save $3.44

> More AMT®/ROUND 2™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/2500 scale STAR TREK™ Cadet Series U.S.S. Enterprise NCC-1701-C model kit as seen in the STAR TREK™ THE NEXT GENERATION™ television series.  This kit features upgrades from the previous versions, including "Aztec" paneling decals and snap together assembly with option to gluing. Kit measures 8.5" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand,  and illustrated instructions.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$13.95 USD
Reg. $17.39
You Save $3.44

> More AMT®/ROUND 2™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/2500 scale STAR TREK™ Cadet Series U.S.S. Enterprise Starship Set (NCC-1701, NCC-1701-A, and NCC-1701-B) as seen in the STAR TREK™ television series and movies.  This kits features upgrades from the previous versions, including "Aztec" paneling decals and snap together assembly with option to gluing. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand,  and illustrated instructions.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$13.95 USD < OUT OF STOCK
Reg. $17.39
You Save $3.44

> More AMT®/ROUND 2™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/1400 scale STAR TREK™ U.S.S. Enterprise NCC-1701-D "Clear" plastic model kit as seen in the STAR TREK™ THE NEXT GENERATION™ television series.  This kit features upgrades from the previous versions, including molded in clear plastic, "Aztec" paneling decals, and insignia display stand. Kit measures 18" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
"Aztec" paneling decals, display stand, and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

COMING IN AUGUST

> More AMT®/ROUND 2™ Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ STAR TREK™ K-7 Space Station model kit as seen in the original STAR TREK™ television episode "TROUBLE WITH TRIBBLES". This kit features an in-scale U.S.S. Enterprise and new decal markings for the station and Enterprise.  Kit measures 6" tall x 15" wide when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
Markings decal sheet, In-scale U.S.S. Enterprise, display stand, and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

$19.95 USD
Reg. $24.95
You Save $5.00

> More AMT®/ROUND 2™ Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/650 scale STAR TREK™ Vulcan Shuttle "Surak" model kit as seen in STAR TREK™ THE MOTION PICTURE, features several upgrades from previous versions, including revised warp nacelle grille detail as well as shuttle and sled connection skid plates. Shuttle attaches magnetically to the warp sled with neodymium magnets (included). The kit also includes panel decals and measures 10" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
Over 25 pieces, paneling decals, Federation and Vulcan marking decals, 2 neodymium magnets, and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

$22.95 USD
Reg. $31.25
You Save $8.30

> More AMT®/ROUND 2™ Models
> More 1/187 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/650 scale STAR TREK™ U.S.S. Enterprise "Collector's 2nd Edition Tin" Space Ship model kit. This new edition of the "embossed tin" features a "green color scheme" that makes it the perfect companion piece to the AMT®/ROUND 2™ 1/12 scale Mr. Spock "Collector's Edition Tin". Also new to this release: this special edition is molded in blue plastic, very reminiscent of an early release of the kit. Classic Enterprise is 18" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
28 pieces, decals, and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

IMPORTANT INFORMATION: This is a Limited Run of the AMT®/ROUND 2™ 1/650 Scale STAR TREK™ U.S.S. Enterprise "Collector's 2nd Edition Tin" Space Ship Model Kit.  Very Limited Stock!

$32.95 USD < OUT OF STOCK
Reg. $43.75
You Save $10.80

> More AMT®/ROUND 2™ Models
> More 1/650 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/12 Scale STAR TREK™ Mr. Spock model kit. Arguably STAR TREK's most popular character, Mr. Spock made his debut on STAR TREK™ The Original Series in 1966. Over 40 years later, Spock is once again featured in the new STAR TREK™ film.

This classic kit has been out of release for over 30 years. Tooling is being restored to its original configuration to bring this kit back in all its vintage glory. Kit measures 8" long by 7" tall. Skill Level 2 for ages 10 and up.

CONTAINS:
Over 35 pieces and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

$19.95 USD < OUT OF STOCK
Reg. $23.75
You Save $3.80

> More AMT®/ROUND 2™ Models
> More 1/12 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/12 scale STAR TREK™ Mr. Spock Collector's Edition model kit. This new edition of the "embossed tin" features a "green color scheme" that makes it the perfect companion piece to the AMT®/ROUND 2™ 1/650 scale STAR TREK™ U.S.S. Enterprise "Collector's 2nd Edition Tin".

This classic kit has been out of release for over 30 years. Tooling is being restored to its original configuration to bring this kit back in all its vintage glory. Collector's Edition features a full-color embossed tin with retro-style artwork, plus bonus collectible art print. Kit measures 8" long by 7" tall. Skill Level 2 for ages 10 and up.

CONTAINS:
Over 35 pieces, Commemorative Box Art Print, and illustrated instructions.

NOTE:
Requires paint and modeling cement (not included).

IMPORTANT INFORMATION: This is a Limited Run of the AMT®/ROUND 2™ 1/12 scale STAR TREK™ - Mr. Spock Collector's Edition Model Kit.  Very Limited Stock!

$32.95 USD
Reg. $43.75
You Save $10.80

> More AMT®/ROUND 2™ Models
> More 1/12 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/1400 scale STAR TREK™ U.S.S. Enterprise NCC-1701-E as seen on the STAR TREK™ movies. This kit measures 19" long when assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
Decals, display stand, and instructions.

NOTE:
Requires paint and modeling cement (not included).

$24.95 USD
Reg. $31.25
You Save $6.30

> More AMT®/ROUND 2™ Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the AMT®/ROUND 2™ 1/650 scale STAR TREK™ U.S.S. Enterprise NCC-1701 model kit as seen on the original STAR TREK™ television episodes. This kit measures 18" long when fully assembled. Skill Level 2 for ages 10 and up.

CONTAINS:
Features original classic 1966 box art, detailed decals, display stand, and instructions.

NOTE:
Requires paint and modeling cement (not included).

$19.95 USD < OUT OF STOCK
Reg. $24.65
You Save $4.70

> More AMT®/ROUND 2™ Models
> More 1/650 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/1000 scale KLINGON D-6 "GHON DOQ" Class Cruiser model kit based on the design from STARFLEET-MUSEUM.ORG™. Kit contains 8 resin pieces, display base, and measures approximately 9.25" long x 5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Bridge, (1) Secondary Hull, (1) Impulse/Shuttle Bay Section, (2) Nacelle Pylons, (2) Nacelles, (1) Waterslide Decals, (1) Display Base, and (1) Instructions.

NOTE:
Requires paint and modeling cement (not included).

$64.95 USD

> More DELTA QUADRANT™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/1000 scale KLINGON D-2 "DAQTAGH" Class Cruiser model kit based on the design from STARFLEET-MUSEUM.ORG™. Kit contains 10 resin pieces, display base, and measures approximately 6" long x 5" wide when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (1) Bridge, (2) Torpedo Tubes, (2) Disruptor Canons, (2) Nacelle Pylons, (2) Nacelles, (1) Waterslide Decals, (1) Display Base, and (1) Instructions.

NOTE:
Requires paint and modeling cement (not included).

$54.95 USD

> More DELTA QUADRANT™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/1000 scale KESTREL Class Cruiser model kit based on the design from STARFLEET-MUSEUM.ORG™. Kit contains 3 resin pieces, display base, and measures approximately 5.5" long x 5" wide when fully assembled.

CONTAINS:
(1) Primary Hull/Nacelles, (2) Nacelle Tips, (1) Waterslide Decals, (1) Display Base, and (1) Instructions.

NOTE:
Requires paint and modeling cement (not included).

$39.95 USD

> More DELTA QUADRANT™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/1000 scale SURAK Class "Vulcan Ring" Ship model kit as seen on the STAR TREK™ ENTERPRISE™ television series. Kit contains 13 resin pieces and features sharp details for it's size. Kit is approximately 13.5" long x 3.75" wide when fully assembled.

CONTAINS:
(1) Forward Section, (3) Primary Hulls, (1) Aft Section, (4) Warp Rings (3) Warp Field Emitters, (1) Impulse Section, and (1) Instructions.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$59.95 USD

> More DELTA QUADRANT™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/2500 scale SURAK Class "Vulcan Ring" Ship model kit as seen on the STAR TREK™ ENTERPRISE™ television series. Kit contains 6 resin pieces and features sharp details for it's size. Kit is approximately 5.5" long x 1.25" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Warp Rings (3) Warp Field Emitters, and (1) Instructions.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$29.95 USD

> More DELTA QUADRANT™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the DELTA QUADRANT™ 1/2500 scale CARDASSIAN GALOR/KELDON Class model kit as seen on the STAR TREK™ DEEP SPACE NINE™ television series. Kit contains 8 resin pieces and features addition resin pieces plus decals to build either the GALOR or KELDON Class. Kit is approximately 6" x 5.8" when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull (1) Primary Canon, (1) KELDON Hull, (1) Aft Section, (2) Tail Fins, (1) Torpedo Pod, (1) Instructions, and (1) authentic decals.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$39.95 USD < OUT OF STOCK

> More DELTA QUADRANT™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is a highly detailed 1/1400 scale Nebula Class Conversion Kit. This kit is designed to convert the AMT/ERTL STAR TREK™: The Next Generation U.S.S. Enterprise NCC-1701-D into the Nebula Class Starship.  Requires paint and modeling cement (NOT INCLUDED). Decals are NOT INCLUDED.

CONTAINS:
Eleven (11) resin, two (2) clear resin, one (1) transparent red, and two (2) transparent blue resin parts.  Detail instructions included.

NOTE:
This conversion kit requires the AMT/ERTL STAR TREK™: The Next Generation U.S.S. Enterprise NCC-1701-D Model Kit or the AMT/ERTL STAR TREK™: The Next Generation U.S.S. Enterprise NCC-1701-D With Fiber Optic Lights (SOLD SEPERATELY).  Decal NOT INCLUDED.

$85.00 USD

> More Don's Light & Magic Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/1400 scale "TMP" KLINGON Bird of Prey resin model kit as seen on the STAR TREK™ 3 - 6 movies.  This kit is extremely detailed for it's size. Kit contains 13 resin pieces and measures approximately 3.25" long x 4.5" wide when fully assembled. Can be built in "Attack" or "Cruise" flight mode.

CONTAINS:
(1) Primary Hull, (1) Lower Hull/Cargo section (2) Wing Pylons, (2) Wing "Cruise" Fins, (2) Wing "Attack" Fins, (2) Disruptor Canons, (1) Engine section, (1) Torpedo Bay, (1) Sensor Array, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$29.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION Heavy Frigate - U.S.S. Hornet NCC-1972 resin model kit, similar in design to the ships seen on the STAR TREK™ (2009) movie. This kit is extremely detailed for it's size. Kit contains 11 resin pieces and measures approximately 6.25" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (3) Bussard Collectors, (3) Nacelles, (3) Nacelle End Caps, (1) Torpedo Bay, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$39.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION Frigate - U.S.S. Valiant NCC-1765 resin model kit, as seen in the STAR TREK™ (2009) movie. This kit is extremely detailed for it's size. Kit contains 7 resin pieces and measures approximately 6" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Bussard Collectors, (2) Nacelles, , (2) Nacelle End Caps, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$34.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION CONSTELLATION Class - U.S.S. Constellation NCC-1017 resin model kit, similar in design to the ships seen on the STAR TREK™ (2009) movie. This kit is extremely detailed for it's size. Kit contains 12 resin pieces and measures approximately 7.75" long x 4" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Torpedo Bay/Nacelle Pylon Support, (2) Bussard Collectors, (2) Nacelles, (1) Secondary Hull, (1) Deflector Arrays, (1) Deflector Housing, (1) Shuttle Bay, (2) Nacelle End Caps, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$44.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION Strike Cruiser - U.S.S. Hood NCC-1734 resin model kit as seen on the STAR TREK™ (2009) movie. This kit is extremely detailed for it's size. Kit contains 16 resin pieces and measures approximately 6" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Secondary Hulls, (2) Shuttle Bays, (2) Deflector Arrays, (2) Deflector Housings, (2) Nacelles, (2) Bussard Collectors, (2) Nacelle End Caps, (1) Torpedo Bay, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$39.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION Fire Support Destroyer - U.S.S. Arizona NCC-041 resin model kit. This kit is extremely detailed for it's size. Kit contains 4 resin pieces and measures approximately 6.25" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Nacelle, (1) Bussard Collector, (1) Nacelle End Cap, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$33.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/1000 scale "TMP" KLINGON Bird of Prey resin model kit as seen on the STAR TREK™ 3 - 6 movies.  This kit is extremely detailed for it's size. Kit contains 13 resin pieces and measures approximately 4.5" long x 6.5" wide when fully assembled. Can be built in "Attack" or "Cruise" flight mode.

CONTAINS:
(1) Primary Hull, (1) Lower Hull/Cargo section (2) Wing Pylons, (2) Wing "Cruise" Fins, (2) Wing "Attack" Fins, (2) Disruptor Canons, (1) Engine section, (1) Torpedo Bay, (1) Sensor Array, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$39.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale "TMP" KLINGON Bird of Prey resin model kit as seen on the STAR TREK™ 3 - 6 movies.  This kit is extremely detailed for it's size. Kit contains 9 resin pieces and measures approximately 1.75" long x 2.25" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Lower Hull/Cargo section (2) Wing Pylons, (2) Disruptor Canons, (1) Engine section, (1) Torpedo Bay, (1) Sensor Array, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$19.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale "TOS" ROMULAN Bird of Prey resin model kit as seen on the original STAR TREK™ television series. This kit is extremely detailed for it's size. Kit contains 9 resin pieces and measures approximately 2" long x 2.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Wing Pylons, (2) Nacelles, (2) Bussard Collectors, (2) Nacelle End Caps, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$19.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale "Early" KLINGON Bird of Prey resin model kit as seen on the STAR TREK™ ENTERPRISE television series. This kit is extremely detailed for it's size. Kit contains 12 resin pieces and measures approximately 2.25" long x 2" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Drive Section, (2) Wings, (2) Engine Thrusters, (2) Gun Turrets, (1) Gun Turret Housing, (3) Misc. Pieces, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$19.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale FEDERATION Deep Space Scout - U.S.S. Kelvin NCC-0514 resin model kit as seen on the STAR TREK™ (2009) movie. This kit is extremely detailed for it's size. Kit contains 8 resin pieces and measures approximately 6.25" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (1) Nacelle, (1) Bussard Collector, (1) Nacelle End Cap, (1) Deflector Array, (1) Deflector Housing, (1) Shuttle Bay, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$34.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale "Early" KLINGON D-4 Battle Cruiser resin model kit as sadly never seen on the STAR TREK™ ENTERPRISE television series. This kit is extremely detailed for it's size. Kit contains 3 resin pieces and measures approximately 3.25" long x 2.25" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Nacelles, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$19.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/2500 scale Military Transport Freighter resin model kit as seen on the STAR TREK™ DEEP SPACE NINE television series. This kit is extremely detailed for it's size. Can be built as a FEDERATION, KLINGON, CARDASSIAN, ROMULAN, or NEKRIT vessel.  Kit contains 20 resin pieces and measures approximately 5" long x 1.25" wide when fully assembled.

CONTAINS:
(1) Navigational/Deflector Array, (1) Primary Hull, (1) Bridge/Engineering Section, (17) Cargo Containers, (1) Instructions/Decal Placement Guide, and (1) Decal Sheet.

NOTE:
Requires paint and modeling cement (not included).  Display stand not included.

$19.95 USD

> More GIZMOTRON MODELS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the GIZMOTRON MODELS™ 1/1000 scale "Early" THOLIAN Web Spinners resin model kit as seen on the STAR TREK™ ENTERPRISE television series. This kit is extremely detailed for it's size. This kit contains three (3) resin ships and each measures approximately 1.4" long x .5" wide in size.

CONTAINS:
(3) THOLIAN Web Spinners, (2) Decals Sheets, (1) Instructions/Placement Guide.

NOTE:
Requires paint (not included).  Display stand not included.

$12.95 USD < OUT OF STOCK

> More GIZMOTRON MODELS™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale ROMULAN V-7 "White Wind" as seen in the FASA™ ROMULAN Ship Recognition Manual. This kit contains 7 resin pieces and measures approximately 2.5" long x 4.75" wide when fully assembled. 

CONTAINS:
(7) Resin pieces and (1) Instructions.

NOTE:
Kit does not include decals. Requires paint and modeling cement (not included).  Display stand not included.

$24.75 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Vulcan Warp "Long Range" Shuttles as first seen in STAR TREK™ THE MOTION PICTURE. This kit contains 8 resin pieces and measures approximately .75" long x .25" wide when fully assembled.

CONTAINS:
(8) Resin pieces and (1) Instructions.

NOTE:
Kit does not include decals. Requires paint and modeling cement (not included).  Display stand not included.

$12.50 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale KLINGON "Vor'Cha" as seen in STAR TREK™ THE NEXT GENERATION. This kit contains 6 resin pieces and measures approximately 6" long x 4" wide when fully assembled.

CONTAINS:
(6) Resin pieces and (1) Instructions.

NOTE:
Kit does not include decals. Requires paint and modeling cement (not included).  Display stand not included.

$75.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale SABER Class Starship as  first seen in STAR TREK™ FIRST CONTACT movie. This kit contains 5 resin pieces and measures approximately 3" long x  2.75" wide when fully assembled. 

CONTAINS:
(5) Resin pieces and (1) Instructions.

NOTE:
Kit does not include decals. Requires paint and modeling cement (not included).  Display stand not included.

$27.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale RAVEN Class Starship as first seen in the STAR TREK™ VOYAGER television series. This kit contains 6 resin pieces and measures approximately 1.5" long x 1" wide when fully assembled.

CONTAINS:
(6) Resin pieces and (1) Instructions.

NOTE:
Kit does not include decals. Requires paint and modeling cement (not included).  Display stand not included.

$18.00 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale KLINGON D-4 "Predator" from the STAR TREK™ Universe, features the highest quality resin pieces and incredible attention to detail. Assembled D-4 "Predator" model measures approximately 4.25 x 2.25 inches (subject to change). 

CONTAINS:
(8) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Oberth Class Starship as first seen in STAR TREK™ III: The Search for Spock and STAR TREK™: The Next Generation television series, features the highest quality resin pieces and incredible attention to detail.   Assembled Oberth model measures approximately 2.50 x 1.25 inches (subject to change).

CONTAINS:
(2) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale NOVA Class Starship features the highest quality resin pieces and incredible attention to detail.  Assembled NOVA model measures approximately 3 x 1.5 inches (subject to change).

CONTAINS:
(12) pieces for building either the NOVA (Equinox) or NOVA Refit (Rhode Island) and detailed instructions.

NOTE:
Decals are NOT included. Requires paint and modeling cement (not included).

$23.00 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Norway Class Starship as  first seen in STAR TREK™ VIII: First Contact, features the highest quality resin pieces and incredible attention to detail. Assembled Norway model measures approximately 5.75 x 3.50 inches (subject to change). 

CONTAINS:
(4) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$45.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Cardassian LAKAT Class Cruiser as seen in the STAR TREK™: Armada Universe, features the highest quality resin pieces and incredible attention to detail.   Assembled LAKAT model measures approximately 5.15 x 3.25 inches (subject to change).

CONTAINS:
(3) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$36.00 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale KLINGON K-23 "Little Killer" as  first seen in FASA's KLINGON Ship Recognition Manual, features the highest quality resin pieces and incredible attention to detail. Assembled K-23 model measures approximately 3 x 2 inches (subject to change). 

CONTAINS:
(3) Resin pieces and (1) Instructions.

NOTE: Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$23.25 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Dominion Jem'Hadar Attack "Bug" Fighter features the highest quality resin pieces and incredible attention to detail. Jem'Hadar Fighter model measures approximately 1.75 x 2 inches (subject to change).

CONTAINS:
(1) Resin piece kit.

NOTE:
Decals are NOT INCLUDED. Requires paint (not included).

$15.00 USD

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Jester Class Starship features the highest quality resin pieces and incredible attention to detail. Assembled Jester model measures approximately 2 x 1.25 inches (subject to change).

CONTAINS:
Two (2) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$15.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Intrepid Class Starship as seen in the STAR TREK™: Voyager television series, features the highest quality resin pieces and incredible attention to detail. Assembled Intrepid model measures approximately 5.5 x 2.25 inches (subject to change).

CONTAINS:
(10) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$50.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale KLINGON K-27 "Grim Reaper" as  first seen in FASA's KLINGON Ship Recognition Manual, features the highest quality resin pieces and incredible attention to detail. Assembled K-27 model measures approximately 4 x 2.75 inches (subject to change). 

CONTAINS:
(3) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$30.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Defiant Class Starship as seen in the STAR TREK™: Deep Space Nine television series, features the highest quality resin pieces and incredible attention to detail. Assembled Defiant model measures approximately 2.50 x 1.15 inches (subject to change).

CONTAINS:
(4) Resin pieces and (1) Instructions.

NOTE:  
Decals are NOT INCLUDED. Requires paint and modeling cement (not included)

$20.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale KLINGON D-10 Battlecruiser as first seen in FASA's KLINGON Ship Recognition Manual, features the highest quality resin pieces and incredible attention to detail.  Assembled D-10 model measures approximately 4.25 x 2.25 inches (subject to change). 

CONTAINS:
(7) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$30.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale Coventry Class Starship for the STAR TREK™ Universe, features the highest quality resin pieces and incredible attention to detail. Assembled Coventry model measures approximately 4 x 2 inches (subject to change). 

CONTAINS:
(5) Resin pieces and (1) Instructions.

NOTE:
Decals are NOT INCLUDED. Requires paint and modeling cement (not included).

$24.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS™ 1/2500 scale CHEYENNE Class Starship model kit as seen in the television episode STAR TREK™: The Next Generation - "Best of Both Worlds". Model kit measures approximately 6" x 4.5" when fully assembled. 

CONTAINS:
(1) Primary Hull, (2) Warp Pylons, (4) Nacelles, (1) Instructions, (3) Decal sheets, and (1) Decal Placement Guide.

NOTE:
Display Stand Not Included. Requires paint and modeling cement (not included).

$50.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the ODYSSEY SLIPWAYS 1/2500 Scale AKIRA Class Starship resin model kit as seen on the STAR TREK™ FIRST CONTACT movie. This kit features the highest quality resin pieces and incredible attention to detail. Kit contains 6 resin pieces and measures approximately 7" long x 4" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Secondary Hulls, (1) Weapons Pod, and (2) Nacelles, (1) Decal Sheet, and (1) Instructions.

NOTE:
Display stand not included. Requires paint (not included).

$50.00 USD < OUT OF STOCK

> More ODYSSEY SLIPWAYS™ Models
> More 1/2500 Scale Models
> More Models

DESCRIPTION:
This is the POLAR LIGHTS™ 1/1000 scale STAR TREK™ U.S.S. Enterprise NCC-1701-A plastic model kit as seen on the STAR TREK™ 1 - 6 movies. This kit features a "snap" together assembly with no glue or paint required.  This kit includes a display stand with ball-and-socket joint for displaying in a variety of angles and "Aztec" decals for superior detailing. Kit measures approximately 12.25” long fully assembled.

CONTAINS:
(35) Enough plastic parts to complete one ship, (1) "Aztec" Paneling Decals, (1) Marking Decals, (1) Display Stand, and (1) Illustrated Instructions.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$19.95 USD
MSRP $24.95
You Save $5.00

> More POLAR LIGHTS™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is a re-release of the most popular 1/350 scale STAR TREK™ - U.S.S. Enterprise NCC-1701-A Model Kit from POLAR LIGHTS™ and ROUND 2. Suitable for Ages 10 & Older. FEATURES: Authentically detailed from the STAR TREK™ Motion Pictures movies. Over 150 injection molded parts with unparalleled attention to detail in each piece. Choose to build the NCC-1701 early version or the NCC-1701A, the later version. Realistically detailed Inspection Pod, TMP Shuttlecraft, STAR TREK™ 5 Shuttlecraft, VIP Lounge, Arboretum Ceiling, Neck, Saucer Dome, Pylons and Nacelles. Optional Shuttle Bay with highly detailed deck and cargo hold. Clear injection molded parts also with nice details. Model display base gets highly detailed with decals. Authentic waterslide decal markings. Illustrated assembly guide. INCLUDES: One Plastic Model REQUIRES: Assembly Hobby Knife Cement Paint SPECS: Skill Level: 2 Saucer Dia.: 16-1/8.

NOTE: Due to the weight of this item; additional  shipping charges apply. Requires paint and modeling cement (not included).

$69.95 USD < OUT OF STOCK
MSRP $106.25
You Save $36.30

> More POLAR LIGHTS™ Models
> More 1/350 Scale Models
> More Models

DESCRIPTION:
This is the POLAR LIGHTS™ 1/1000 scale STAR TREK™ Enterprise NX-01  model kit from the STAR TREK™ ENTERPRISE television series and features snap together assembly with no glue or paint required, but recommended. Kit is approximately 9" long when fully assembled.

CONTAINS:
Over 35 parts, water-release decals, instructions, and display stand.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$16.95 USD
MSRP $19.75
You Save $2.80

> More POLAR LIGHTS™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the POLAR LIGHTS™ 1/1000 scale STAR TREK™ KLINGON D7 Battle Cruiser model kit from the STAR TREK™ television series and features snap together assembly with no glue or paint required, but recommended. Kit is approximately 10" long when fully assembled.

CONTAINS:
Over 35 parts, water-release decals, sticker sheet, instructions, and display stand.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$16.95 USD
MSRP $19.75
You Save $2.80

> More POLAR LIGHTS™ Models
> More 1/1000 Scale Models
> More Models

Click Image to Enlarge

DESCRIPTION:
This is the POLAR LIGHTS™ 1/1000 scale STAR TREK™ U.S.S. Enterprise NCC-1701 plastic model kit as seen on the original STAR TREK™ television series. This kit features enough parts to build 1 of 3 versions and "snap" together assembly with no glue or paint required. Kit measures approximately 11.5" long when fully assembled.

CONTAINS:
(50) Enough plastic parts to complete 1 of 3 versions, (1) Decal Sheet, (1) Instruction Sheet, (1) Display Stand.

NOTE:
Glue and Paint (not included) is not required, but recommended.

$16.95 USD
MSRP $19.75
You Save $2.80

> More POLAR LIGHTS™ Models
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Titan (LUNA Class) model kit as commanded by Captain William T. Riker and features the highest quality of resin pieces and incredible attention to detail. Kit contains 12 resin pieces including display base and measures approximately 12.75" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (1) Sensor Pod, (2) Nacelles, (2) Nacelles Pylons, (2) Bussard Collectors, (2) Bussard Deflectors, (1) Instructions/Decal Placement Guide, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$75.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale "Early" KLINGON Bird of Prey model and features the highest quality of resin pieces and incredible attention to detail. Kit contains 15 resin pieces including display base and measures approximately 4" long x 4.25" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Drive Section, (2) Wings, (2) Engine Thrusters, (2) Gun Turrets, (1) Gun Turret Housing, (5) Misc. Pieces, (1) Instructions/Decal Placement Guide, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1000 Scale NV-01 Intrepid model and features the highest quality of resin pieces and incredible attention to detail. Kit contains 7 resin pieces including display base and measures approximately 7" long x 5.25" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Deflector Array, (1) Deflector Emitter, (2) Bussard Collectors, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$45.00 USD

> More STARCRAFT MODELS™
> More 1/1000 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Mayflower model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 7 resin pieces including display base and measures approximately 8.75" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Bussard Collectors, (2) Bussard Collectors, (2) Nacelles, (2) Nacelle Pylons, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Defiant model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 8 resin pieces including display base and measures approximately 8.75" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Torpedo Bay, (2) Bussard Collectors, (2) Nacelles, (2) Nacelle Pylons, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Armstrong model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 11 resin pieces including display base and measures approximately 10" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Torpedo Bay, (3) Bussard Collectors, (3) Nacelles, (3) Nacelle Pylons, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$75.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Newton model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 17 resin pieces including display base and measures approximately 10" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (2) Secondary Hulls, (2) Deflector Arrays, (2) Deflector Emitters, (2) Shuttle Bays, (2) Bussard Collectors, (2) Nacelles, (2) Nacelle Pylons, (1) Torpedo Bay/Support (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$75.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale "Refit" NOVA Class - U.S.S. Rhode Island NCC-72701 resin model kit as seen on the STAR TREK™ VOYAGER "END GAME" episode. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 3 resin pieces including display base and measures approximately 6.5" long x 3.25" wide when fully assembled.

CONTAINS:
(1) Primary/Secondary Hull, (2) Nacelles, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale U.S.S. Kelvin model kit and features the highest quality of resin pieces and incredible attention to detail. Kit contains 8 resin pieces including display base and measures approximately 10" long x 5.75" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Secondary Hull, (1) Deflector Array, (1) Deflector Emitter, (1) Shuttle Bay, (1) Bussard Collector, (1) Nacelle, (1) Decal Sheet, (1) Instruction Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$65.00 USD

> More STARCRAFT MODELS™
> More 1/1400 Scale Models
> More Models

DESCRIPTION:
This is the STARCRAFT MODELS™ 1/1400 Scale "TUG" PTOLEMY Class Transport - U.S.S. Ptolemy NCC-3801 resin model kit as designed by Franz Joseph. This kit features the highest quality of resin pieces and incredible attention to detail. Kit contains 11 resin pieces including display base and measures 7.75" long x 3.5" wide when fully assembled.

CONTAINS:
(1) Primary Hull, (1) Cargo Docking Port, (2) Nacelles, (1) Deflector Array, (1) Deflector Support, (1) Deflector Emitter, (1) Cargo Container, (2) Cargo End Caps, (1) Decal Sheet, and (1) Insignia Display Base.

NOTE:
Requires paint and modeling cement (not included).

$40.00 USD