DESCRIPTION:
This is a detailed pre-painted 1/144 scale STAR WARS™ TIE Advanced Fighter with Darth Vader Figure model as seen in STAR WARS™ IV: A New Hope. Part of the STAR WARS™ Vehicle Collection Volume 2.  These kits comes pre-painted and highly detailed.  Some assembly required.

CONTAINS:
(1) TIE Advanced Fighter replica, (1) Darth Vader Figure and (1) Display Stand.

NOTE:
No Gluing, No Painting, and Assembly Required.

$11.95 USD

> More F-TOYS™ Confect Models
> More Models

DESCRIPTION:
This is a detailed pre-painted 1/144 scale STAR WARS™ Y-WING Fighter model as seen in STAR WARS™ IV: A New Hope. Part of the STAR WARS™ Vehicle Collection Volume 2.  These kits comes pre-painted and highly detailed.  Some assembly required.

CONTAINS:
(1) Y-Wing Fighter replica and (1) Display Stand.

NOTE:
No Gluing, No Painting, and Assembly Required.

$11.95 USD

> More F-TOYS™ Confect Models
> More Models

DESCRIPTION:
This is a detailed pre-painted 1/144 scale STAR WARS™ Snowspeeders as seen in STAR WARS™ V: The Empire Strikes Back. Part of the STAR WARS™ Vehicle Collection Volume 2.  These kits comes pre-painted and highly detailed.  Some assembly required.

CONTAINS:
(1) Y-Wing Fighter replica and (1) Display Stand.

NOTE:
No Gluing, No Painting, and Assembly Required.

$11.95 USD

> More F-TOYS™ Confect Models
> More Models

DESCRIPTION:
This is a detailed pre-painted 1/144 scale STAR WARS™ Naboo N-1 Fighter and Droid Fighter model as seen in STAR WARS™ Phantom Menace. Part of the STAR WARS™ Vehicle Collection Volume 1. 

CONTAINS:
(1) Naboo N-1 Fighter replica, (1) Droid Fighter, and (1) Display Stand.

NOTE:
No Gluing, No Painting, and Assembly Required.

$11.95 USD

> More F-TOYS™ Confect Models
> More Models

DESCRIPTION:
This is a detailed pre-painted 1/144 scale STAR WARS™ X-Wing Fighter model as seen in STAR WARS™ Episodes IV - VI. Part of the STAR WARS™ Vehicle Collection Volume 1.

CONTAINS:
(1) X-Wing Fighter replica and (1) Display Stand.

NOTE:
No Gluing, No Painting, and Assembly Required.

$11.95 USD

> More F-TOYS™ Confect Models
> More Models

Description:
This Odyssey Slipways resin model kit of the 1/2256 scale TANTIVE IV Cruiser as seen in Star Wars Episode 3 movie.  This kit is in the same scale as the Revell 1/2256 scale Republic Star Destroyer and features the highest quality resin pieces and incredible attention to detail.  Measures approximately 2.25 x .75 inches (subject to change).

Contains: One (1) piece resin kit.

NOTE: Decals are NOT INCLUDED. Requires paint (not included).

$10.00 USD - < OUT OF STOCK

> More 1/2256 Scale Models
> More Odyssey Slipways Models
> More Models

Description:
This Odyssey Slipways resin model kit of the 1/2256 scale RADIANT VII Cruiser as seen in Star Wars Episode I movie.  This kit is in the same scale as the Revell 1/2256 scale Republic Star Destroyer and features the highest quality resin pieces and incredible attention to detail. Measures approximately 2.25 x 1.25 inches (subject to change).

Contains: One (1) piece resin kit.

NOTE: Decals are NOT INCLUDED. Requires paint (not included).

$10.00 USD  < OUT OF STOCK

> More 1/2256 Scale Models
> More Odyssey Slipways Models
> More Models

Description:
This Odyssey Slipways resin model kit of the 1/2256 scale LAAT/i Republic Gunships as seen in STAR TREK™ Episode 2 movie and Clone Wars animated series.  This kit is in the same scale as the Revell 1/2256 scale Republic Star Destroyer and features the highest quality resin pieces and incredible attention to detail. Measures approximately .25 x .25 inches (subject to change).

Contains: Six (6) LAAT/i Republic Gunships.

NOTE: Decals are NOT INCLUDED. Requires paint (not included).

$11.00 USD

> More 1/2256 Scale Models
> More Odyssey Slipways Models
> More Models

Description:
This Odyssey Slipways resin model kit of the 1/2256 scale CR-20 Republic Troop Carriers as seen in Star Wars Clone Wars animated series.  This kit is in the same scale as the Revell 1/2256 scale Republic Star Destroyer and features the highest quality resin pieces and incredible attention to detail. Measures approximately 1 x .5 inches (subject to change).

Contains: Three (3) CR-20 Republic Troop Carriers.

NOTE: Decals are NOT INCLUDED. Requires paint (not included).

$11.00 USD

> More 1/2256 Scale Models
> More Odyssey Slipways Models
> More Models

Description:
This Odyssey Slipways resin model kit of the 1/2256 scale ARC-170 Fighters as seen in Star Wars Episode III movie.  This kit is in the same scale as the Revell 1/2256 scale Republic Star Destroyer and features the highest quality resin pieces and incredible attention to detail.  Measures approximately .25 x .25 inches (subject to change).

Contains: Nine (9) ARC-170 Fighters.

NOTE: Decals are NOT INCLUDED. Requires paint (not included).

$11.50 USD < OUT OF STOCK

> More 1/2256 Scale Models
> More Odyssey Slipways Models
> More Models

DESCRIPTION:
This is the REVELL® 1/98 scale STAR WARS™ SnapTite® AT-TE (All Terrain Tactical Enforcer) Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 8.75" long fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(64) pieces.

NOTE:
No Paint or Modeling Cement required.

$28.95 USD
MSRP $33.50
You Save $4.55

> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/40 scale STAR WARS™ SnapTite® Ahsoka Tano's Starfighter Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 8" long fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(35) pieces.

NOTE:
No Paint or Modeling Cement required.

$21.95 USD
MSRP $26.50
You Save $4.55

> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/50 scale STAR WARS™ SnapTite® AAT (Armored Assault Tank) Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 7.75" long fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(38) pieces.

NOTE:
No Paint or Modeling Cement required.

$28.95 USD
MSRP $35.00
You Save $6.05

> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/120 scale STAR WARS™ SnapTite® Republic Attack Shuttle Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 8" long fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(54) pieces including display stand.

NOTE:
No Paint or Modeling Cement required.

$28.95 USD
MSRP $35.00
You Save $6.05

> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/32 scale STAR WARS™ SnapTite® General Grievous' Starfighter Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 8.25" long fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(35) pieces including Grievous and display stand.

NOTE:
No Paint or Modeling Cement required.

$26.95 USD
MSRP $32.00
You Save $5.05

> More 1/32 Scale Models
> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/72 scale STAR WARS™ SnapTite® V-19 Torrent Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 5.25" long x 10" wide when fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(32) pieces including Clone pilot and (1) display stand.

NOTE:
No Paint or Modeling Cement required.

$21.95 USD
MSRP $23.95
You Save $2.00

> More 1/72 Scale Models
> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/72 scale STAR WARS™ SnapTite® Magnaguard Fighter Model Kit as seen in the animated STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 8.25" long by 8.75" wide when fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(32) pieces including Magnaguard pilot and (1) display stand.

NOTE:
No Paint or Modeling Cement required.

$19.95 USD
MSRP $22.50
You Save $2.55

> More 1/72 Scale Models
> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/72 scale STAR WARS™ SnapTite® Republic Gunship as seen in STAR WARS™ CLONE WARS™ television series. Features quick snap together assembly with no gluing required. Kit already comes pre-painted and detailed. Kit measures 9.25" long by 9.75 wide when fully assembled. Skill level 1 (ages 8 and up).

CONTAINS:
(39) pieces including clone pilots and troopers and (1) display stand.

NOTE:
No Paint or Modeling Cement required.

$26.95 USD
MSRP $29.95
You Save $3.00

> More 1/72 Scale Models
> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/72 scale STAR WARS™ SnapTite® AT-AT (All-Terrain Armored Transport). Features quick snap together assembly with no gluing required. Multi-colored parts (no painting required) with moveable head, legs, and laser canons. Skill level 1 (ages 8 and up).

CONTAINS:
72 pieces and approximately 15.75 inches in length.

NOTE:
No Paint or Modeling Cement required.

$45.95 USD
Reg. $50.00
You Save $4.05

> More 1/72 Scale Models
> More REVELL® Models
> More Models

DESCRIPTION:
This is the REVELL® 1/72 scale STAR WARS™ SnapTite® ARC-170 Starfighter Model Kit from STAR WARS™ REVENGE OF THE SITH™. Skill level 1 (ages 8 and up).

CONTAINS:
36 pieces and approximately 8.25 inches in length.

NOTE:
No Paint or Modeling Cement required.

$15.95 USD

> More 1/72 Scale Models
> More REVELL® Models
> More Models